Skip to main content

Wood pendant light made from kitchen countertop

After cutting a kitchen countertop I had some leftover wood and I didn’t want to waste it. I ended up making this wood pendant light which fits well as part of the kitchen.

KARLBY countertop

KARLBY countertop | IKEA.com

But I’m considering buying another countertop to cut specifically to make lamps/ handrails with light.

It’s not a hard project. The only part that took some time was cable management. I carefully made sure everything was neatly tucked within the confines of the wood and invisible at a glance.

Materials used:
  • Scrap piece from KARLBY countertop (free, new countertop cost $149)
  • LEDBERG LED strip colored (I used an Osram LED-strip I had laying around) ($24.99)
  • Scrap wood blocks (free) (optional)
  • 4 screws (Box of 200 – $4)
  • 4 hooks (Box of many – $4)

How to make a wood pendant light from scrap

I started out by finding a piece of scrap KARLBY countertop that had the dimensions I liked. And then planned how to hang it.

I went for a long rectangle but this can work equally well with any shape.

KARLBY countertop

Cut the scrap wood blocks to size and place them along the center of the width of the light.

I placed the end blocks further in from the main piece because I wanted the light to be softer on those ends. If you like even light from all sides, space the wood blocks evenly.

wood pendant light

Screw on the wood blocks that will support the LED-strips onto the KARLBY piece.

(As an alternative to using the wood blocks to support the LEDs, you can stick the LEDs directly to the KARLBY. The light will bounce off the ceiling. This will result in softer and dimmer light.)

LED circuit

Find a good place to attach the power supply.

Screw in the hooks.

LED circuit

Wrap the LED-strips around the wood blocks. Be careful not to angle them too sharply as this can interrupt the circuit.

Cut the strip to size. If you wrap it the way I’m showing here, the light will appear continuous.

wood pendant light

Attach two hooks to the ceiling with the same spacing as on the wood, but facing the other way.

Hang your new lamp on the hooks.

wood pendant light

Enjoy the ambient light that comes from your new lamp and test out what colors you like best.

wood pendant light

~ by B. Alexander

The post Wood pendant light made from kitchen countertop appeared first on IKEA Hackers.

Comments

Post a Comment

Popular posts from this blog

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...
Post a Comment
Read more

KALLAX desk ideas: Three ways to set up a workstation

Three great ideas for a KALLAX desk . #1 Compact, minimalist desk for laptop I put together a KALLAX desk for my laptop for just under 25 euros. Just a KALLAX 2×2 is needed. No other materials required. IKEA item used: KALLAX 2 x 2 (77 x 77 cm) KALLAX 2×2 | IKEA.com All you need to do is assemble 3 of the pieces in a U shape. That is all.  If you want to strengthen the structure you would need to drill a couple of holes in order to use the long middle shelf of the KALLAX unit as a back reinforcer. Easy and it works. ~ by Fabio Tudela #2 KALLAX standing desk I choose to stand at work because it makes me feel infinitely more productive. Our department recently moved into a new building and we had the opportunity to design our own spaces. Items Used: VIKA AMON / TORNLIDEN table top x 2 (discontinued, replaced by LINNMON ) KALLAX 4 cube x 2 KALLAX drawer unit x 2 8 – 3″ locking casters / wheels 1 – 6′ zinc brace I had a few VIKA AMON tables ...
Post a Comment
Read more

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a  Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...
Post a Comment
Read more