Skip to main content

Glass shelving unit / bookcase… made out of shelves

I had old IKEA GRUNDTAL shelves lying around and I wanted a glass shelving unit for my modem and plants. It took me two evenings to complete and the cost came up to around $80. Looking back, I would have ordered the glass clamps from China for lower cost.

I like how simple it looks. Minimalistic, with no support beams needed. It looks modern and slick and I was able to choose my own shelf spacing based on my needs. The most important thing about this hack is to maintain low center of mass for stability.

IKEA items used:
Other materials and tools:

Hack instructions for glass shelving unit:

The EKBY are used as side walls. Note that the side walls should be mirror images of each other. Attach furniture pads.

Mark two crosses per shelf on each EKBY shelf.

Glass shelving unit / bookcase... made out of shelves

For stability, use at least three glass shelves. The shelf unit is quite wobbly with only two shelves. Try to avoid having a high center of mass.

Fasten glass clamps for the uppermost and the lowermost shelves and tightly secure glass shelves, with the unit placed on its back. This way the glass shelves will self-align to the floor level.

Glass shelving unit / bookcase... made out of shelves

Lift the unit, fasten the remaining glass clamps and glass shelves.

Affix the felt pads to the bottom of the EKBY shelves.

~ by Leon Mintz

The post Glass shelving unit / bookcase… made out of shelves appeared first on IKEA Hackers.

Comments

Popular posts from this blog

Hackers Help: How to attach headboard to ESPEVÄR mattress base?

I’m trying to figure out if a headboard can be attached to an Espevar Mattress Base , and how to accomplish that. I’m looking at a standard metal headboard (because I just prefer the look of curved metal to what IKEA offers) and am not interested in a slat base with just a mattress on top, and a wall mounted headboard is not an option due to renting. Thanks for any help! ~ Amy *** Hi Amy I’ve not seen the ESPEVÄR in person but I believe it is possible to attach a headboard to it. From the website, the ESPEVÄR looks like a regular wooden slatted mattress base under a bed base slipover. As to how to attach it, that will depend on the fittings on the metal headboard. So you will just need to get the right hardware to secure the metal headboard to the wooden frame. And make some small openings on the slipcover to let the fixtures to go through. Jules Photo: IKEA.com Try these free-standing headboards for size A lime green and white headboard that takes centerstage in the r...

Kitchen renovation reveal: Rhombus wall steals the show

It’s been a while since I did a home tour. If you’ve missed the previous reveals, you can catch up with my Master Bathroom remodel and Guest Bathroom reveal . Today, let’s focus on my kitchen renovation. Hands down, this is the most used room in my home. I spend crazy amounts of time in here, even when I’m not cooking. Just off to the side of the kitchen I converted an awkward space into a reading nook . In the mornings, I sit and read or pray and meditate, before it gets too warm. And on the other side, there’s a work-in-progress plant wall / indoor garden which also takes up a lot of my time. So, all in all, lots of traffic in here, and that’s not even counting cooking and eating time. The kitchen is definitely my favourite room, because the transformation is huge and I love how it turned out. Kitchen renovation: The before House 17 when I first got it, actually had 2 kitchens, which is a very common “Asian” home concept. First, the “dry kitchen”, which is where you make simp...

IKEA sofa with genius armrest storage

Bet you never knew your sofa armrests were prime storage space. Ok, so the guys at IKEA are the masters of hidden / secret storage everywhere. In fact, one of the things I most loved about the  ESKILSTUNA sofa series was the undercover storage on the chaise lounge, but… what? More than 80 liters of storage space wasted on the armrests? NO WAY! I really don’t understand how they didn’t take that opportunity with several different armrest modules. Mobile chargers, cup / can holders, foldable tables, refrigerators… there’s SO MUCH space in there. I can’t stop thinking on different options! For myself, I went for two designs. First, a “full space” design on the (right) side of the chaise lounge. (The cavity fits two foldable chairs). Second, on the left armrest — a flip open section for “mobile charger / remote control storage / etc.”. Below that, a full-depth pull-out drawer, tall enough to store A4 sized magazines. This is the final result: Full space design, rig...