Preschool Design in Brooklyn Encourages Play and Curiosity

Maple Street School, located in the rapidly changing neighborhood of Prospect Lefferts Gardens, in Brooklyn, New York, was looking to expand into a second location and found a fitting site in a new mixed-use development. BFDO and 4|MATIV collaborated to provide the cooperative school with a design program that would fit their spatial and curricular needs.

The preschool sees itself as an extension of home, where each child is nurtured in a warm and caring atmosphere, and where curiosity and play are central to learning. These concepts shaped the design process and its outcome, as the designers looked for highly functional solutions to meet their needs.
The layout is comprised of four interconnected spaces: a multipurpose room and three classrooms. A central and semi-open kitchen is located in the multipurpose room to promote healthy eating habits.

The classrooms are connected through large pairs of pocket doors with playful openings, allowing interaction between classrooms and among children and staff.

A warm and light palette of maple wood and white walls runs throughout all spaces. The simplicity allows surfaces to act as backdrops for all the hands-on artwork that children create. An outdoor recreation area on the building’s rooftop carries a colorful rubber tile pattern with a large pixelated graphic of islands. Photography and information courtesy of BFDO and 4|MATIV.

The post Preschool Design in Brooklyn Encourages Play and Curiosity appeared first on Freshome.com.

Comments

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...

KALLAX desk ideas: Three ways to set up a workstation

Three great ideas for a KALLAX desk . #1 Compact, minimalist desk for laptop I put together a KALLAX desk for my laptop for just under 25 euros. Just a KALLAX 2×2 is needed. No other materials required. IKEA item used: KALLAX 2 x 2 (77 x 77 cm) KALLAX 2×2 | IKEA.com All you need to do is assemble 3 of the pieces in a U shape. That is all. If you want to strengthen the structure you would need to drill a couple of holes in order to use the long middle shelf of the KALLAX unit as a back reinforcer. Easy and it works. ~ by Fabio Tudela #2 KALLAX standing desk I choose to stand at work because it makes me feel infinitely more productive. Our department recently moved into a new building and we had the opportunity to design our own spaces. Items Used: VIKA AMON / TORNLIDEN table top x 2 (discontinued, replaced by LINNMON ) KALLAX 4 cube x 2 KALLAX drawer unit x 2 8 – 3″ locking casters / wheels 1 – 6′ zinc brace I had a few VIKA AMON tables ...

Martin Cooper

Search This Blog