Hackers Help: ALGOT installation problems

I installed the wall mounted rails for the ALGOT shelf system and something has gone wrong. We were careful to measure properly but the shelves will not connect properly to the brackets. Instead, three of the four edges click into the bracket but then there is a gaping hole not allowing for the fourth edge to connect. (See pictures.)

PLEASE HELP! Has this happened to anyone else? I have so many holes in my wall that I’m on the verge of a breakdown.

Hackers Help: Algot installation problems

***

Hi Roblox,

Firstly, you’re not alone. Many have gone bonkers installing the ALGOT system.

And we’ve had a few posts on ALGOT installation problems: See here and here. Though the problems they had were with the ALGOT wire mesh baskets, they may give you a few clues on installing the shelves.

Also do try these steps (from the assembly manual) in adjusting the width of the ALGOT uprights. It looks like you may need to inch the left upright towards to right.

Hackers Help: Algot installation problems

Let us know how it went.
Jules

The post Hackers Help: ALGOT installation problems appeared first on IKEA Hackers.

Comments

Hackers Help: How to attach headboard to ESPEVÄR mattress base?

I’m trying to figure out if a headboard can be attached to an Espevar Mattress Base , and how to accomplish that. I’m looking at a standard metal headboard (because I just prefer the look of curved metal to what IKEA offers) and am not interested in a slat base with just a mattress on top, and a wall mounted headboard is not an option due to renting. Thanks for any help! ~ Amy *** Hi Amy I’ve not seen the ESPEVÄR in person but I believe it is possible to attach a headboard to it. From the website, the ESPEVÄR looks like a regular wooden slatted mattress base under a bed base slipover. As to how to attach it, that will depend on the fittings on the metal headboard. So you will just need to get the right hardware to secure the metal headboard to the wooden frame. And make some small openings on the slipcover to let the fixtures to go through. Jules Photo: IKEA.com Try these free-standing headboards for size A lime green and white headboard that takes centerstage in the r

Kitchen renovation reveal: Rhombus wall steals the show

It’s been a while since I did a home tour. If you’ve missed the previous reveals, you can catch up with my Master Bathroom remodel and Guest Bathroom reveal . Today, let’s focus on my kitchen renovation. Hands down, this is the most used room in my home. I spend crazy amounts of time in here, even when I’m not cooking. Just off to the side of the kitchen I converted an awkward space into a reading nook . In the mornings, I sit and read or pray and meditate, before it gets too warm. And on the other side, there’s a work-in-progress plant wall / indoor garden which also takes up a lot of my time. So, all in all, lots of traffic in here, and that’s not even counting cooking and eating time. The kitchen is definitely my favourite room, because the transformation is huge and I love how it turned out. Kitchen renovation: The before House 17 when I first got it, actually had 2 kitchens, which is a very common “Asian” home concept. First, the “dry kitchen”, which is where you make simp

IKEA sofa with genius armrest storage

Bet you never knew your sofa armrests were prime storage space. Ok, so the guys at IKEA are the masters of hidden / secret storage everywhere. In fact, one of the things I most loved about the ESKILSTUNA sofa series was the undercover storage on the chaise lounge, but… what? More than 80 liters of storage space wasted on the armrests? NO WAY! I really don’t understand how they didn’t take that opportunity with several different armrest modules. Mobile chargers, cup / can holders, foldable tables, refrigerators… there’s SO MUCH space in there. I can’t stop thinking on different options! For myself, I went for two designs. First, a “full space” design on the (right) side of the chaise lounge. (The cavity fits two foldable chairs). Second, on the left armrest — a flip open section for “mobile charger / remote control storage / etc.”. Below that, a full-depth pull-out drawer, tall enough to store A4 sized magazines. This is the final result: Full space design, right of cha

Martin Cooper

Search This Blog