Contemporary Urban Refuge: the Skygarden House in Toronto

Image courtesy of Dubbeldam Architecture + Design.

Dubbeldam Architecture + Design completed the development of the Skygarden House, a contemporary residence located in midtown Toronto, Canada. The three-level home hides between the trees on the site and offers plenty of outdoor spaces for work and relaxation.

The architects remodeled a century-old building on the site, turning it into a contemporary refuge. Colorful and fresh, the interiors of the Skygarden House feature floor-to-ceiling windows, allowing natural light to flood the spaces. The highlight of the property is an open-air roof deck, which extends the public areas of the residence.

Image courtesy of Dubbeldam Architecture + Design.

“Although the new house is only 2,420 square feet, it feels much larger — its rooms expand beyond the interior of the house to a series of highly usable outdoor spaces that enrich the domestic experience, each with its own unique character and varying level of privacy,” the architects said.

“The rear yard is landscaped and features a generously scaled thermally-treated ash wood deck. A few steps down is another zone, defined by granite pavers and planted with a row of honey locust trees that offer dappled light and shade in summer. Even the existing porch at the front of the house is an extension of the indoor living space, remade into a private outdoor dining room enclosed by a five-foot-high wood screen, extending the private realm into the public arena.” All the photos and information in this article provided by Dubbeldam Architecture + Design.

Image courtesy of Dubbeldam Architecture + Design.

Image courtesy of Dubbeldam Architecture + Design.

The post Contemporary Urban Refuge: the Skygarden House in Toronto appeared first on Freshome.com.

Comments

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...

A beautiful design idea for the IVAR cabinet with doors

A wall of IVAR cabinets with doors engraved is astonishingly captivating. Because IVAR is real solid wood (unlike a lot of flat-pack cupboards), it makes a great blank canvas for CNC machining work and engraving. IKEA items used: IKEA IVAR cabinets in 30mm (12″) and 50mm (20″) depths. IVAR cabinet | IKEA.com Other materials and tools: CNC Router How to engrave the IVAR cabinet with doors: Build a wall of IVAR cabinets to your preference. It’s not too difficult to shorten some in order to fill a wall exactly. I shortened the top row to 695mm and reduced the depth of the middle column to 40mm to create a 50/40/30 sequence so that I didn’t block the window but maximised storage capacity. Take a drawing, trace it in Inkscape or Adobe Illustrator into a black-only flat design. You can simplify the path at this point to reduce the time needed to engrave. Chop up the drawing in Inkscape or Adobe Illustrator into door-sized sections. Save as an SVG. Import the ...

Martin Cooper

Search This Blog