Skip to main content

A Gracefully Rejuvenated Industrial-Style Apartment in Warsaw

industrial-style apartment

Image courtesy of Design Studio Soma Architekci.

Design Studio Soma Architekci completed the design and development of Koneser Apartment, a contemporary 78 square meter (840 square foot) crib located in Warsaw, Poland. The newly refurbished industrial-style apartment is part of a building that used to house a local vodka factory.

“The factory is an example of European architecture from the turn of the 19th century,” the designers explained. “The red brick, along with narrow windows, lovely cornices, small towers and arched ceilings make for an authentic atmosphere.” Consistency with the characteristics of the industrial building was the main factor to consider when designing this apartment.

Image courtesy of Design Studio Soma Architekci.

The heart of the space is an open plan kitchen, living and dining area, which features modern finishes, as well as industrial-style detailing. The kitchen’s brick wall was restored and currently acts as one of the focal points of the living area. Some of the furniture and lighting units feature black metal structures, which add to the industrial vibe of the Warsaw apartment. The lamp in the kitchen made up of strips of fiberglass was envisioned by French designer Constance Guisset.

Despite its industrial style, the apartment feels warm and welcoming thanks to decorative cushions, soft fabrics and rugs. Natural light fills up the entire space through large windows which pay tribute to the architecture of the historical building. Enjoy the virtual gallery below and let us know your thoughts! All photos and information were provided by Design Studio Soma Architekci.

Image courtesy of Design Studio Soma Architekci.

Image courtesy of Design Studio Soma Architekci.

Image courtesy of Design Studio Soma Architekci.

Image courtesy of Design Studio Soma Architekci.

Image courtesy of Design Studio Soma Architekci.

Image courtesy of Design Studio Soma Architekci.

Image courtesy of Design Studio Soma Architekci.

The post A Gracefully Rejuvenated Industrial-Style Apartment in Warsaw appeared first on Freshome.com.

Comments

Post a Comment

Popular posts from this blog

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...
Post a Comment
Read more

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a  Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...
Post a Comment
Read more

A beautiful design idea for the IVAR cabinet with doors

A wall of IVAR cabinets with doors engraved is astonishingly captivating. Because IVAR is real solid wood (unlike a lot of flat-pack cupboards), it makes a great blank canvas for CNC machining work and engraving. IKEA items used: IKEA IVAR cabinets in 30mm (12″) and 50mm (20″) depths. IVAR cabinet | IKEA.com Other materials and tools: CNC Router How to engrave the IVAR cabinet with doors: Build a wall of IVAR cabinets to your preference. It’s not too difficult to shorten some in order to fill a wall exactly. I shortened the top row to 695mm and reduced the depth of the middle column to 40mm to create a 50/40/30 sequence so that I didn’t block the window but maximised storage capacity. Take a drawing, trace it in Inkscape or Adobe Illustrator into a black-only flat design. You can simplify the path at this point to reduce the time needed to engrave. Chop up the drawing in Inkscape or Adobe Illustrator into door-sized sections. Save as an SVG. Import the ...
Post a Comment
Read more