Skip to main content

How to Reduce Moisture in the Bathroom

We hope you like the products we recommend. Just so you are aware, Freshome may collect a share of sales from the links on this page.
So you’re done taking a shower — and suddenly it feels like you’re in part two of your shower. But it’s a cold, sad drip of a shower. You look up and there’s condensation dripping off the ceiling, possibly even from the fan itself. Condensation isn’t just irritating, it’s also potentially damaging to drywall, wood and paint. So if you have moisture in the bathroom, below are several ways to make sure your bathroom is staying as dry as possible. And even if you don’t have current visible moisture issues, you can still prevent future problems and keep your bathroom feeling less humid with these tips.

The tips range from being simple fixes like just opening the heating vent in the bathroom to purchasing a dehumidifier or new bathroom fan. Fixing the moisture in the bathroom problem usually runs from free to around $200 at the higher end for large bathroom fans. The most expensive option, getting heated flooring, can run in the mid-hundreds of dollars. These tips can also take a few minutes or require a couple of hours or so to complete. In an afternoon and with a few hundred bucks max, you can minimize moisture in the bathroom.

Moisture in the Bathroom Mold Spots

These pesky little droplets can lead to mold. Image: nadisja/Shutterstock

Condensation Basics

To start, what is condensation? Most of us know that it’s simply water that accumulates in humid air. More specifically, it’s when humid air hits a cold surface, forming the water droplets we know as condensation. The warmer humid air gets, the more it can deposit as condensation, which is why we notice so much of it after hot showers.

Too much condensation can mean dripping water along your bathrooms surfaces. Paint finishes can chip and wallpaper can be ruined as water collects. And, worse yet, mold can start to form if there is too much unresolved moisture in the bathroom.

So read on to learn how to avoid these problems. And don’t forget to check for and remove mold if you’ve had condensation problems for a while.

Moisture in the Bathroom White Fan

Your bathroom fan is often your first line of defense in keeping the bathroom dry, so make sure to keep it free of dirt and dust. Image: Radovan1/Shutterstock

Find Ways to Keep the Air Drier

Luckily, keeping your bathroom free of mold and excess condensation isn’t as hard as it may seem. By trying the following tips, you may even find that reducing moisture in the bathroom was easier than you thought:

  • Check any of your heating and cooling vents to make sure they are not closed or partially closed. Even something as small as that can reduce how much dry air is getting into the bathroom, causing condensation issues.
  • If you find your bathroom is too humid, simply open windows in the bathroom if you have them. It’s a good way to air out the bathroom when the weather is nice.
  • Anything that adds heat to the room can dry out the space. If you’ve been wanting heated flooring in the bathroom, this might be your excuse.
  • You can also add a portable dehumidifier, which usually runs anywhere from $20 to $50 for smaller models.
  • You should check to make sure your fan is up to the job. Your bathroom should have an extractor fan to carry the moisture elsewhere, especially if your bathroom doesn’t have windows. Clean the dust and dirt away from the fan to keep it running efficiently.
  • You can buy a demistable mirror, which has heating pads on the back of the mirror. Since the mirror is warm, condensation can’t form on the mirror, leading to less moisture in the bathroom.
  • You can also buy anti-condensation paint, which will shrink the chance for mold and paint chipping, as water won’t stay on the walls.
Moisture in the Bathroom Foggy Mirror

Show your bathroom some love by wiping off those misty mirrors. Image: Denys Kurbatov/Shutterstock

Adjust Your Shower Routine to Reduce Moisture in the Bathroom

Another easy way to reduce moisture is to adjust your shower routine. These tend to be some of the cheapest and easiest tips, too.

  • As mentioned above, warmer humidity means more condensation. Simply take cooler showers.
  • Wipe your shower, mirror and sink down after use to reduce any standing water that will evaporate into the air.
  • Take any wet towels or clothes out of the bathroom immediately to avoid further moisture in the area.

And remember, start with the easiest solutions first and work your way up to the more involved, expensive ones. You don’t want to try replacing a bathroom fan when it turns out all you had to do was open a heating vent.

The post How to Reduce Moisture in the Bathroom appeared first on Freshome.com.

Comments

Popular posts from this blog

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...

Enjoy Sweet Dreams With These DIY Headboard Ideas

A headboard is one of the last things you see before you fall asleep and one of the first things you see when you wake up. Demonstrate your unique design style by creating your own. Below are some ideas and tips to get you started. Do you think the formula for sleep is on this London bedroom’s headboard? Image: Clifton Interiors Ltd Chalk headboard Create this look with a can of black chalkboard paint. Almost any type of wall – drywall, plaster, wood, brick or concrete – will work, as long is it is properly prepped. Chalkboard paint is easy to apply, dries fast and can be cleaned with soap and water. But you’re not limited to the color black – chalkboard paint comes in just about every color. If you don’t want to use paint, consider chalkboard contact paper – and yes, you can use chalk on it. An Edmonton hockey-themed room. Image: Cameron Homes Hockey goal headboard For the ultimate hockey fan, nothing beats a hockey goal headboard. Complete the scene with a team blank...

A beautiful design idea for the IVAR cabinet with doors

A wall of IVAR cabinets with doors engraved is astonishingly captivating. Because IVAR is real solid wood (unlike a lot of flat-pack cupboards), it makes a great blank canvas for CNC machining work and engraving. IKEA items used: IKEA IVAR cabinets in 30mm (12″) and 50mm (20″) depths. IVAR cabinet | IKEA.com Other materials and tools: CNC Router How to engrave the IVAR cabinet with doors: Build a wall of IVAR cabinets to your preference. It’s not too difficult to shorten some in order to fill a wall exactly. I shortened the top row to 695mm and reduced the depth of the middle column to 40mm to create a 50/40/30 sequence so that I didn’t block the window but maximised storage capacity. Take a drawing, trace it in Inkscape or Adobe Illustrator into a black-only flat design. You can simplify the path at this point to reduce the time needed to engrave. Chop up the drawing in Inkscape or Adobe Illustrator into door-sized sections. Save as an SVG. Import the ...