Simple radiator shelf and cover for less than £30

I had been looking for a reasonably priced radiator shelf but as I wanted to cover a storage heater none were deep enough. I thought of hacking a BILLY but wandering around IKEA, I saw the HEJNE and the EKBY which were the perfect size and they inspired me.

I am also in rented accommodation so as I can’t start drilling into the walls to fix a shelf. I needed something free standing.

IKEA items used:

EKBY shelf 119cm x 28cm
HEJNE storage – 3 x double 28cm shelf packs
1 x post

Other materials:

35mm size 4 screws

Hack instructions for radiator shelf:

Screw a HEJNE shelf to each short side of the EKBY shelf using the IKEA bolts provided. You will need to drill holes in the shelf ends.

I used one of the HEJNE posts, cut to size with a mini circular saw, at the bottom across the front to stabilise it using the existing holes and IKEA bolts per the IKEA instructions. I wanted to put one at the back too but the radiator I was covering has feet so I couldn’t.

I then realised I hadn’t accounted for the skirting board so rather than trying to fashion a cut out for it I used the other HEJNE post across the back, fixing it to the shelves per the HEJNE instructions. I made it slightly higher than the EKBY so I could use the existing holes but you could fix it level if wanted by drilling new holes.

Simple radiator shelf for less than £30

I then used 3 x 35mm screws to fix it to the EKBY shelf for stability. The other 4 shelves were used across the front. I used the IKEA bolts (2 per shelf) to screw the end of the shelf into the EKBY top (holes need to be drilled) and then used the 35mm screws, through the existing holes, to fix to the post across the bottom.

The radiator shelf took about 4 hours to make. Total cost came up to £28. I am sure my hubby who is an engineer and a whiz at DIY could have done it much more quickly!

What I like about the radiator shelf hack is its relative simplicity. It’s easy for someone not experienced in DIY to do. The hardest part about this hack was carrying all the stuff home on the tram as I do not drive!

I bought an Allen key attachment for the screwdriver drill which was the best thing ever and made the screwing of the bolts easy.

~ by Liz

The post Simple radiator shelf and cover for less than £30 appeared first on IKEA Hackers.

Comments

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...

A beautiful design idea for the IVAR cabinet with doors

A wall of IVAR cabinets with doors engraved is astonishingly captivating. Because IVAR is real solid wood (unlike a lot of flat-pack cupboards), it makes a great blank canvas for CNC machining work and engraving. IKEA items used: IKEA IVAR cabinets in 30mm (12″) and 50mm (20″) depths. IVAR cabinet | IKEA.com Other materials and tools: CNC Router How to engrave the IVAR cabinet with doors: Build a wall of IVAR cabinets to your preference. It’s not too difficult to shorten some in order to fill a wall exactly. I shortened the top row to 695mm and reduced the depth of the middle column to 40mm to create a 50/40/30 sequence so that I didn’t block the window but maximised storage capacity. Take a drawing, trace it in Inkscape or Adobe Illustrator into a black-only flat design. You can simplify the path at this point to reduce the time needed to engrave. Chop up the drawing in Inkscape or Adobe Illustrator into door-sized sections. Save as an SVG. Import the ...

Martin Cooper

Search This Blog