Skip to main content

ALGOT desk with extendable desktop and keyboard tray

I wanted a new desk using the full length of the space beneath my window. When working from home I would like to look at the view once a while. Because I also have a foldaway bed in the room I didn’t want to use up too much space so my solution was to make an extendable desktop/ keyboard tray as part of the desk.

Take a look at the “Before” and “After” photos and see what a huge difference it made to my space.ALGOT desk with extendable desktop and keyboard tray ALGOT desk with extendable desktop and keyboard tray

IKEA items used:
  • ALGOT system to create the wall-mounted desk
  • ALGOT wire basket
  • ALGOT pull-out rails for basket
Tools:

How I made the ALGOT desk with extendable desktop and keyboard tray

I used the ALGOT system to make a long wall-mounted desk. For the extendable desktop/ keyboard tray I used the ALGOT wire basket (which I cut with a handsaw) and the ALGOT pull-out rail for baskets. Be careful not to cut yourself.

ALGOT desk with extendable desktop and keyboard tray

old KRISTER computer desk

ALGOT desk with extendable desktop and keyboard tray

Remove the top rim from the basket to use with the pull-out rails

I combined this with a part of my old IKEA computer table. I bought it about 20 years ago and it was called the KRISTER. Discontinued now.

ALGOT desk with extendable desktop and keyboard tray

Related: Complete home office and workstation hack. Massive!

ALGOT desk with extendable desktop and keyboard tray

I put this part on top of/ in the cut-off rim of the basket. I didn’t expect it, but it fit perfectly. My keyboard tray slides perfectly beneath the ALGOT wall-mounted desk.

ALGOT desk with extendable desktop and keyboard tray

Related: No space for a long desk? Try these 6 L-shaped desks to boost productivity

ALGOT desk with extendable desktop and keyboard tray ~ by Farida

The post ALGOT desk with extendable desktop and keyboard tray appeared first on IKEA Hackers.

Comments

Post a Comment

Popular posts from this blog

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...
Post a Comment
Read more

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a  Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...
Post a Comment
Read more

A beautiful design idea for the IVAR cabinet with doors

A wall of IVAR cabinets with doors engraved is astonishingly captivating. Because IVAR is real solid wood (unlike a lot of flat-pack cupboards), it makes a great blank canvas for CNC machining work and engraving. IKEA items used: IKEA IVAR cabinets in 30mm (12″) and 50mm (20″) depths. IVAR cabinet | IKEA.com Other materials and tools: CNC Router How to engrave the IVAR cabinet with doors: Build a wall of IVAR cabinets to your preference. It’s not too difficult to shorten some in order to fill a wall exactly. I shortened the top row to 695mm and reduced the depth of the middle column to 40mm to create a 50/40/30 sequence so that I didn’t block the window but maximised storage capacity. Take a drawing, trace it in Inkscape or Adobe Illustrator into a black-only flat design. You can simplify the path at this point to reduce the time needed to engrave. Chop up the drawing in Inkscape or Adobe Illustrator into door-sized sections. Save as an SVG. Import the ...
Post a Comment
Read more