Skip to main content

Chalet-Style Residence in California Withstands Harsh Weather

chalet-style residence nordenMork Ulnes Architects completed the design of a contemporary 3,300-square-foot chalet-style residence located in Norden, California. The project, named Troll Hus, aims to capture nature views while maintaining a high level of privacy.

“The design is driven both by the extreme environmental conditions found at a 6,800-foot elevation and a California sensibility of generous indoor-outdoor living,” the architects explained. “The house is lifted on concrete legs to protect it from snow in excess of 800 inches a year. The building’s orientation shields it from prevailing winds while allowing living spaces to open onto glazed south-facing balconies, maximizing solar exposure in the winter and shading the interior in the summer.”chalet-style residence norden troll husThe interiors of this chalet-style residence are minimalist, with living areas on the second floor and private spaces below. An open plan living and dining area offers plenty of room for socializing, while generously sized windows and balconies ensure an optimum connection to the outdoors.

An abundance of wood embellishes the interiors and adds personality to the overall exterior design as well. “The building is clad in pine tar-treated wood — the same natural, robust cladding found on 1,000-year-old Norwegian barns — which allows Troll Hus to recede within the canopy of surrounding pines,” the architects added. Photography by Bruce Damonte.

chalet-style residence norden interior

chalet-style residence kitchen

chalet-style residence windows chalet-style residence balcony chalet-style residence winter

The post Chalet-Style Residence in California Withstands Harsh Weather appeared first on Freshome.com.

Comments

Post a Comment

Popular posts from this blog

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...
Post a Comment
Read more

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a  Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...
Post a Comment
Read more

A beautiful design idea for the IVAR cabinet with doors

A wall of IVAR cabinets with doors engraved is astonishingly captivating. Because IVAR is real solid wood (unlike a lot of flat-pack cupboards), it makes a great blank canvas for CNC machining work and engraving. IKEA items used: IKEA IVAR cabinets in 30mm (12″) and 50mm (20″) depths. IVAR cabinet | IKEA.com Other materials and tools: CNC Router How to engrave the IVAR cabinet with doors: Build a wall of IVAR cabinets to your preference. It’s not too difficult to shorten some in order to fill a wall exactly. I shortened the top row to 695mm and reduced the depth of the middle column to 40mm to create a 50/40/30 sequence so that I didn’t block the window but maximised storage capacity. Take a drawing, trace it in Inkscape or Adobe Illustrator into a black-only flat design. You can simplify the path at this point to reduce the time needed to engrave. Chop up the drawing in Inkscape or Adobe Illustrator into door-sized sections. Save as an SVG. Import the ...
Post a Comment
Read more