Indoor plant needs light? Try this Plant Tray / Display with Light

Both my husband and I love plants, but there are a few places in the house that really don’t get enough light for them to thrive – so there was a bit of a brainwave. After picking up some cheap Fuku Bonsai, we found out that all they need is a few hours of visible spectrum light – which they can get from an LED lamp….and a hack was born! Everyone that sees it wants one – and they only take about 30 minutes to make one plant tray /display board at most.

Materials:

(1) JANSJÖ light with base
(1) FASCINERA chopping board
(6) Stick on cork feet to keep it up off the tabletop (and so you don’t have to countersink the screws).
(1) Fuku Bonsai from Aldi (or your local nursery)

How to make a plant tray / display board

Take the JANSJÖ out of the box. Throw away the base but keep the screws.

Drill some pilot holes and screw the base mounting screws through the bottom of the FASCINERA chopping board.

Add a few cork feet and you won’t have to countersink the screws at all. Plug it in, and that’s it.

One Plant Tray / Display board with Light

Related: IVAR plant nursery

We added a Fuku Bonsai from Aldi but you could add any small plant that needs a bit of daylight – a few hours a day will keep it nice and green and healthy even in a dim room – plus it looks pretty.

~ by Carley and Aaron

The post Indoor plant needs light? Try this Plant Tray / Display with Light appeared first on IKEA Hackers.

Comments

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...

KALLAX desk ideas: Three ways to set up a workstation

Three great ideas for a KALLAX desk . #1 Compact, minimalist desk for laptop I put together a KALLAX desk for my laptop for just under 25 euros. Just a KALLAX 2×2 is needed. No other materials required. IKEA item used: KALLAX 2 x 2 (77 x 77 cm) KALLAX 2×2 | IKEA.com All you need to do is assemble 3 of the pieces in a U shape. That is all. If you want to strengthen the structure you would need to drill a couple of holes in order to use the long middle shelf of the KALLAX unit as a back reinforcer. Easy and it works. ~ by Fabio Tudela #2 KALLAX standing desk I choose to stand at work because it makes me feel infinitely more productive. Our department recently moved into a new building and we had the opportunity to design our own spaces. Items Used: VIKA AMON / TORNLIDEN table top x 2 (discontinued, replaced by LINNMON ) KALLAX 4 cube x 2 KALLAX drawer unit x 2 8 – 3″ locking casters / wheels 1 – 6′ zinc brace I had a few VIKA AMON tables ...

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...

Martin Cooper

Search This Blog