How to disguise your Bike Trailer as a end table

I created this hack for two reasons. It saves space by not having to store my bike trailer and I really thought it would look interesting to use the trailer as an end table. To use the bike trailer all I do is lift off the top and connect to my bike.

IKEA Items used:

SLADDA Bike Trailer
ÄDELSTEN Mortar and pestle
HEJNE deep shelf
VÅRDA

Other materials used:

Wood supports
Twine
6″ wood disks 1/8 thick
Felt pads

Bike trailer end table instructions

1. I had an extra deep shelf pair from a HEJNE shelf unit I put together. I pried off the ends of the shelf that holds the slats together.

2. I used to 1″x1″ boards as underneath supports. I nailed the slats from the HEJNE shelf to these supports with no spacing.

How to disguise your Bike Trailer as a end table

3. I drove out the nails that had connected the slats to the end pieces already pried out.

4. I applied the VÅRDA clear stain.

5. I threaded twine through the leftover holes from the nails driven out. One could just trim off the ends so there aren’t any holes.

6. I put felt pads on the underside.

7. I used the ÄDELSTEN upside down with the wood disks stacked for the trailer to be level.

How to disguise your Bike Trailer as a end table

~ by Tim

The post How to disguise your Bike Trailer as a end table appeared first on IKEA Hackers.

Comments

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...

Enjoy Sweet Dreams With These DIY Headboard Ideas

A headboard is one of the last things you see before you fall asleep and one of the first things you see when you wake up. Demonstrate your unique design style by creating your own. Below are some ideas and tips to get you started. Do you think the formula for sleep is on this London bedroom’s headboard? Image: Clifton Interiors Ltd Chalk headboard Create this look with a can of black chalkboard paint. Almost any type of wall – drywall, plaster, wood, brick or concrete – will work, as long is it is properly prepped. Chalkboard paint is easy to apply, dries fast and can be cleaned with soap and water. But you’re not limited to the color black – chalkboard paint comes in just about every color. If you don’t want to use paint, consider chalkboard contact paper – and yes, you can use chalk on it. An Edmonton hockey-themed room. Image: Cameron Homes Hockey goal headboard For the ultimate hockey fan, nothing beats a hockey goal headboard. Complete the scene with a team blank...

Sliding Bookcase Doors KALLAX hack to divide your rooms

I replaced single-glazed sliding doors that divided the sitting room and dining room with a sliding KALLAX bookcase. For one “door”, I used two 2×2 cubes and one 2×1 unit. As we already owned 4 separate KALLAX 2×2 cubes and they seemed to be exactly the same width as the internal doors, we thought it might be possible to stack them. With one additional 2×1 KALLAX they almost matched the height of the internal doors. Sliding KALLAX bookcase doors in closed position First, still a work in progress but let us show you how it looks from the dining room, when the units are pushed together to close up the doorway. And the units pushed apart to enter the living room. We can access the storage cubes from both sides — from the dining or living room — which is so very useful. What I like most is, when viewed from the living room, when closed, it looks almost like a built-in unit. IKEA item used: 2×2 KALLAX units x 4 1×2 KALLAX units x 2 Other materials: 3M mounting tape...

Martin Cooper

Search This Blog