Skip to main content

EKET CD rack: How to add a shelf to the cube

My daughter likes to listen to music or audiobooks with her CD player. To keep her CDs organized, I was looking for a small CD rack. Unfortunately, they were only ugly, huge or no racks to be found in shops (yes, CDs are soo old-school!) So I transformed an EKET shelf in no time at all into a CD rack. The shelf is mounted at a height to also serve as a bedside table at her KURA bed.

Materials for EKET shelf:
  • 1 EKET cube (25cm)
  • 1 MDF board (31.4 x 22cm)
  • 2 MDF boards (15 x 22cm)
  • Spray paint
Tools:

Using a pocket hole jig (and securing it with a clamp), you drill pocket holes into the underside of your MDF board. Then spray paint the board.

After the paint has dried, turn your shelf upside down and place the two smaller MDF boards left and right.

EKET CD rack: How to add a shelf to the cube

Related: Turn the EKET into a hairpin leg nightstand

Then place the painted board on top. Screw the board through the pocket holes to the shelf. The smaller board help with the exact placement of the rack. After screwing in the board, the two small boards are removed.

EKET CD rack: How to add a shelf to the cube

Turn the EKET shelf around, hang it on the wall mounting rail and you are done!

EKET CD rack: How to add a shelf to the cube

~ by Eva

Related: Kid’s closet in the hallway for shoes and bags

 

The post EKET CD rack: How to add a shelf to the cube appeared first on IKEA Hackers.

Comments

Post a Comment

Popular posts from this blog

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...
Post a Comment
Read more

Enjoy Sweet Dreams With These DIY Headboard Ideas

A headboard is one of the last things you see before you fall asleep and one of the first things you see when you wake up. Demonstrate your unique design style by creating your own. Below are some ideas and tips to get you started. Do you think the formula for sleep is on this London bedroom’s headboard? Image: Clifton Interiors Ltd Chalk headboard Create this look with a can of black chalkboard paint. Almost any type of wall – drywall, plaster, wood, brick or concrete – will work, as long is it is properly prepped. Chalkboard paint is easy to apply, dries fast and can be cleaned with soap and water. But you’re not limited to the color black – chalkboard paint comes in just about every color. If you don’t want to use paint, consider chalkboard contact paper – and yes, you can use chalk on it. An Edmonton hockey-themed room. Image: Cameron Homes Hockey goal headboard For the ultimate hockey fan, nothing beats a hockey goal headboard. Complete the scene with a team blank...
Post a Comment
Read more

A beautiful design idea for the IVAR cabinet with doors

A wall of IVAR cabinets with doors engraved is astonishingly captivating. Because IVAR is real solid wood (unlike a lot of flat-pack cupboards), it makes a great blank canvas for CNC machining work and engraving. IKEA items used: IKEA IVAR cabinets in 30mm (12″) and 50mm (20″) depths. IVAR cabinet | IKEA.com Other materials and tools: CNC Router How to engrave the IVAR cabinet with doors: Build a wall of IVAR cabinets to your preference. It’s not too difficult to shorten some in order to fill a wall exactly. I shortened the top row to 695mm and reduced the depth of the middle column to 40mm to create a 50/40/30 sequence so that I didn’t block the window but maximised storage capacity. Take a drawing, trace it in Inkscape or Adobe Illustrator into a black-only flat design. You can simplify the path at this point to reduce the time needed to engrave. Chop up the drawing in Inkscape or Adobe Illustrator into door-sized sections. Save as an SVG. Import the ...
Post a Comment
Read more