Skip to main content

Colorful Home in Romania Revives Traditional Design


Merging rustic-inspired interiors with contemporary details, this colorful abode inspires a homey feel throughout.  Located not far from Bucharest, Romania, The Small House in the Countryside is a project initiated by designer Alina Alexe of Studio Decoraktiva.

The starting point for the project was a decrepit traditional village house with only two rooms and a detached kitchen. Owner and designer Alina Alexe transformed the existing rooms into bedrooms, tore down the old kitchen and extended the construction towards the rear of the property. The addition consists of a large living room, new kitchen and bathroom.

The main facade was kept, together with its traditional balcony and green patterns flanking the main entrance. All doors were restored and painted turquoise, which brings a serene and refreshing touch to the entire scheme. 

Step inside, and you will find a welcoming home, filled with artifacts gathered by the owners during their life journey. Traditional masks and various inserts from the Romanian village’s folklore mark the identity of this colorful crib. As you look closer, you will notice a series of furniture and lighting units that were either recycled, or ingeniously “adjusted.” Take the Ikea sofa, pictured above, which was coated with a new cover to better reflect the traditional style of the interiors.

One of the living room walls was personalized with a special pattern, while the others were painted in “museum-like white”. A traditional fireplace, two colorfully tiled stoves and exposed wooden beams add to the cozy atmosphere. Information provided by Platferma; photos courtesy of Studio Decoraktiva

What are your thoughts on this beautiful Romanian home? Leave a comment and let us know!

The post Colorful Home in Romania Revives Traditional Design appeared first on Freshome.com.

Comments

Post a Comment

Popular posts from this blog

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...
Post a Comment
Read more

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a  Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...
Post a Comment
Read more

A beautiful design idea for the IVAR cabinet with doors

A wall of IVAR cabinets with doors engraved is astonishingly captivating. Because IVAR is real solid wood (unlike a lot of flat-pack cupboards), it makes a great blank canvas for CNC machining work and engraving. IKEA items used: IKEA IVAR cabinets in 30mm (12″) and 50mm (20″) depths. IVAR cabinet | IKEA.com Other materials and tools: CNC Router How to engrave the IVAR cabinet with doors: Build a wall of IVAR cabinets to your preference. It’s not too difficult to shorten some in order to fill a wall exactly. I shortened the top row to 695mm and reduced the depth of the middle column to 40mm to create a 50/40/30 sequence so that I didn’t block the window but maximised storage capacity. Take a drawing, trace it in Inkscape or Adobe Illustrator into a black-only flat design. You can simplify the path at this point to reduce the time needed to engrave. Chop up the drawing in Inkscape or Adobe Illustrator into door-sized sections. Save as an SVG. Import the ...
Post a Comment
Read more