Skip to main content

Hackers Help: Room divider ideas for kids’ shared room

We have recently moved and my two “oldest” (3 and 2) are now having to share a room… needless to say this is not going well. I have looked into tents, curtains etc but they just won’t respect the space, I am needing some more “permanent” room divider ideas — however we rent so it can’t be too permanent! Any ideas? We are so desperate!

Thank you.

~ Katie

***

Hi Katie

Sharing a room can be trying for kids, if they have not grown up with it.

You did not provide any information on the size of the room so I can’t be too specific. But here are a few room divider ideas that can help delineate each child’s space. They are certainly more permanent than tents and curtains but rent-friendly too.

Room divider ideas for kids room

#1 PAX wardrobes as room partition

Richard used the PAX wardrobe system to partition out a room for his son.

room partition

The PAX wardrobe is definitely a good way to add storage and carve out 2 separate spaces for your kids. But you’ll quite a bit of room for this work. Anyhow, take a look at the hack and see whether it works for you.  

#2 STOLMEN/ ELVARLI for bookcase and desk divider

desk room divider

You could make a semi-permanent structure from the ELVARLI system and use it as shelving and desks for the kids. A space to read, write and draw on their own may keep them occupied separately, hopefully. See more of this hack here. 

#3 KALLAX to the rescue
Room divider ideas for kids' shared room

KALLAX | IKEA.com

And of course, there is the KALLAX, the all-time favourite room divider. I have a crazy idea and it could potentially work if your room has space for it. You can have 2 KALLAX units spanning the width of the room to create a “partition wall”. Then add a hinge door (or curtain) to close up the doorway when they want some privacy. 

Room divider ideas for kids' shared room

#4 STUVA room divider with storage

stuva room dividerAnd finally, if you prefer something closed up instead of open like the KALLAX, the STUVA units are perfect for it. Plus you’ll get lots of storage space. See how it’s done. 

Hope you get some thoughts going from these room divider ideas.

Lastly, don’t forget to fasten the units to the wall to avoid tip-over accidents.

If you have more ideas for Katie, do chime in.

Good luck and happy hacking,

Jules

The post Hackers Help: Room divider ideas for kids’ shared room appeared first on IKEA Hackers.

Comments

Post a Comment

Popular posts from this blog

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...
Post a Comment
Read more

KALLAX desk ideas: Three ways to set up a workstation

Three great ideas for a KALLAX desk . #1 Compact, minimalist desk for laptop I put together a KALLAX desk for my laptop for just under 25 euros. Just a KALLAX 2×2 is needed. No other materials required. IKEA item used: KALLAX 2 x 2 (77 x 77 cm) KALLAX 2×2 | IKEA.com All you need to do is assemble 3 of the pieces in a U shape. That is all.  If you want to strengthen the structure you would need to drill a couple of holes in order to use the long middle shelf of the KALLAX unit as a back reinforcer. Easy and it works. ~ by Fabio Tudela #2 KALLAX standing desk I choose to stand at work because it makes me feel infinitely more productive. Our department recently moved into a new building and we had the opportunity to design our own spaces. Items Used: VIKA AMON / TORNLIDEN table top x 2 (discontinued, replaced by LINNMON ) KALLAX 4 cube x 2 KALLAX drawer unit x 2 8 – 3″ locking casters / wheels 1 – 6′ zinc brace I had a few VIKA AMON tables ...
Post a Comment
Read more

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a  Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...
Post a Comment
Read more