Easy wine rack for METOD kitchen cabinet

We recently moved into an apartment with a great IKEA kitchen using the METOD cabinets … the only thing missing was a wine rack.

We solved that pronto, with a super-fast project that used up old bits I had laying around. It required no cutting and was complete in ten minutes!

IKEA items used:

KALLAX insert for bottles | IKEA.com

METOD cabinet and shelves
KALLAX insert for bottles
KALLAX shelves

Tools:

Screwdriver for adjusting shelf pins

Easy kitchen cabinet wine rack

The first thing we did was to space the METOD shelves with six dowel holes between the shelves.

Then, peel the gray felt off the edges of the KALLAX insert for bottles and assemble the pieces of the wine insert. Next, slide the insert in between the METOD shelves.

Lastly, we used leftover KALLAX shelves to make the final side of the little wine cubby.

They wedge in nice and tight, so I didn’t feel they needed to be secured with glue or screws. But you can certainly take the extra step to keep things secure.

And that’s it! The kitchen cabinet wine rack is done.

Last step is, of course, to fill them up with bottles.

Cheers!

~ by Bethany

The post Easy wine rack for METOD kitchen cabinet appeared first on IKEA Hackers.

Comments

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...

A beautiful design idea for the IVAR cabinet with doors

A wall of IVAR cabinets with doors engraved is astonishingly captivating. Because IVAR is real solid wood (unlike a lot of flat-pack cupboards), it makes a great blank canvas for CNC machining work and engraving. IKEA items used: IKEA IVAR cabinets in 30mm (12″) and 50mm (20″) depths. IVAR cabinet | IKEA.com Other materials and tools: CNC Router How to engrave the IVAR cabinet with doors: Build a wall of IVAR cabinets to your preference. It’s not too difficult to shorten some in order to fill a wall exactly. I shortened the top row to 695mm and reduced the depth of the middle column to 40mm to create a 50/40/30 sequence so that I didn’t block the window but maximised storage capacity. Take a drawing, trace it in Inkscape or Adobe Illustrator into a black-only flat design. You can simplify the path at this point to reduce the time needed to engrave. Chop up the drawing in Inkscape or Adobe Illustrator into door-sized sections. Save as an SVG. Import the ...

Martin Cooper

Search This Blog