Q: MALM + KALLAX bed hack with SNARUM mattress?

I want to make a storage bed like the one below by el_massey:

View this post on Instagram

To the folks from AT inboxing me about how I made the bed: 1 large Malm dresser, 4 small Kallax units, mount units to each other/ the wall. with 1/8” plywood under kallax (or thick felt furniture feet) to make up slight height diff. Add slats on top, then full sized mattress. I ended up adding Velcro to the slats to hold the mattress in place, and a push-button light inside so I can see in the dark. Also, furniture sliders under the crate for easy movement/access to interior shelves, and a fan mounted under the desk on the opposite wall so the pup doesn’t get overheated. We’re really happy with our setup (and all the storage we have in such a small footprint!) #ikea #ikeahack #impactdogcrates #apartmenttherapy

A post shared by Erica Massey (@el_massey) on Jun 8, 2018 at 12:09pm PDT

I’ll be using 2 MALM dressers with 3 drawers and 2 KALLAX 2×4.

But instead of adding bed slats on top I would like to just add a IKEA spring mattress that has a built-in base like the SNARUM.

SNARUM Wooden base sprung mattress | Buy on IKEA.com

Will there be a problem with weight distribution or will it work? In my mind the bed usually has 4 small wooden legs that holds it up but will the MALM and KALLAX hold?

~ by Fanny

***

Hi Fanny

The IKEA SNARUM mattress base is basically a wooden box with plywood across, overlaid with a layer of mattress. By the looks of it, it should hold up in your construction.

Cross section of the SKÅRER Wooden base sprung mattress | IKEA.com

The MALM and KALLAX has a slight height difference — so do make sure to prop the KALLAX up (with thin plywood) until they are level with the MALM. When level, the weight of the bed base will be evenly distributed.

Let us know how it turned out.

Happy hacking,

Jules

Hacking may compromise the structural integrity of the item, so please be aware of the risks involved before modifying or altering any IKEA product. Alterations and modifications will also void any warranties or return policies you may have received from IKEA. IKEAhackers.net is not liable for any product failure, injury or damage resulting from the application of suggestions, ideas and hacks featured on this site.

The post Q: MALM + KALLAX bed hack with SNARUM mattress? appeared first on IKEA Hackers.

Comments

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...

A beautiful design idea for the IVAR cabinet with doors

A wall of IVAR cabinets with doors engraved is astonishingly captivating. Because IVAR is real solid wood (unlike a lot of flat-pack cupboards), it makes a great blank canvas for CNC machining work and engraving. IKEA items used: IKEA IVAR cabinets in 30mm (12″) and 50mm (20″) depths. IVAR cabinet | IKEA.com Other materials and tools: CNC Router How to engrave the IVAR cabinet with doors: Build a wall of IVAR cabinets to your preference. It’s not too difficult to shorten some in order to fill a wall exactly. I shortened the top row to 695mm and reduced the depth of the middle column to 40mm to create a 50/40/30 sequence so that I didn’t block the window but maximised storage capacity. Take a drawing, trace it in Inkscape or Adobe Illustrator into a black-only flat design. You can simplify the path at this point to reduce the time needed to engrave. Chop up the drawing in Inkscape or Adobe Illustrator into door-sized sections. Save as an SVG. Import the ...

Martin Cooper

Search This Blog