Skip to main content

How to use LACK shelves to create valance lighting

I did another small and simple hack. Using the IKEA LACK shelves, I created valance lighting for the bathroom.

I used the IKEA LACK wall shelves as the base to install shelves and then hid lights behind them.

This tutorial is also great if you just want to install floating wall shelves of any length.

IKEA items used:
  • IKEA LACK wall shelves (110cm version) x 3
Other materials and tools:
  • Plasterboards
  • Laths
  • Spirit level
  • Dry wall screws
  • Putty
  • Electric drill
  • Trowel
  • Paint

Instructions for DIY valance lighting

1. First, determine the length of the valance lighting to be created and select a corresponding number of LACK wall shelves.

In the case shown here, we used three IKEA LACK wall shelves with a length of 110 cm each. The LACK shelves do not have to completely fill the entire length of the newly emerging valance light. Gaps are allowed and sometimes even useful.

2. After determining the height of the lighting, it starts already.

How to use LACK shelves to create valance lighting

Mount the brackets of the LACK wall shelves on the wall. Use a laser level to make sure they align to each other.

How to use LACK shelves to create valance lighting

3. After mounting the brackets, push the LACK shelves in and locked them in with screws.

How to use LACK shelves to create valance lighting

Covering up the shelves

4. Then, cover the LACK wall shelves with plasterboard.

How to use LACK shelves to create valance lighting

On the bottom panel, we glued the plasterboards and screwed them in as well. Just as a safety precaution, as the drywall screws do not hold well inside the LACK wall shelves.

On the top panel, this is not necessary and in the front, the screws tighten very well.

How to use LACK shelves to create valance lighting

How to use LACK shelves to create valance lighting

View from top of LACK shelves, covered with plasterboard

How to use LACK shelves to create valance lighting

View from below

The front panel is designed as the valance lighting panel. In order to have an indirect valance lighting situation, we made the front panel a few centimetres wider than the LACK shelves.

How to use LACK shelves to create valance lighting

View from below, showing the overhang of the front panel

The Finishing

5. In addition, we glued a stucco profile to the front. That initially creates a gap between the profile and gypsum board which is not tragic. The entire construction is later filled and sanded.

How to use LACK shelves to create valance lighting How to use LACK shelves to create valance lighting How to use LACK shelves to create valance lighting

6. Depending on personal preferences, you can further outfit the new valance lighting to suit your room decor.

Here, you can choose whether you prefer a modern style or classic with stucco profiles. The limit is your imagination only.

DIY Valance Lighting complete

We used this valance lighting above our mirror as seen here.

How to use LACK shelves to create valance lighting How to use LACK shelves to create valance lighting How to use LACK shelves to create valance lighting

7. Finally, wire up the strip lights to get your valance lighting.

How to use LACK shelves to create valance lighting How to use LACK shelves to create valance lighting

It is a very cheap und useful hack.

See the full tutorial of the DIY valance lighting here.

~ by Benjamin Ferger

Take a look at my other hacks:

The post How to use LACK shelves to create valance lighting appeared first on IKEA Hackers.

Comments

Post a Comment

Popular posts from this blog

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...
Post a Comment
Read more

Enjoy Sweet Dreams With These DIY Headboard Ideas

A headboard is one of the last things you see before you fall asleep and one of the first things you see when you wake up. Demonstrate your unique design style by creating your own. Below are some ideas and tips to get you started. Do you think the formula for sleep is on this London bedroom’s headboard? Image: Clifton Interiors Ltd Chalk headboard Create this look with a can of black chalkboard paint. Almost any type of wall – drywall, plaster, wood, brick or concrete – will work, as long is it is properly prepped. Chalkboard paint is easy to apply, dries fast and can be cleaned with soap and water. But you’re not limited to the color black – chalkboard paint comes in just about every color. If you don’t want to use paint, consider chalkboard contact paper – and yes, you can use chalk on it. An Edmonton hockey-themed room. Image: Cameron Homes Hockey goal headboard For the ultimate hockey fan, nothing beats a hockey goal headboard. Complete the scene with a team blank...
Post a Comment
Read more

A beautiful design idea for the IVAR cabinet with doors

A wall of IVAR cabinets with doors engraved is astonishingly captivating. Because IVAR is real solid wood (unlike a lot of flat-pack cupboards), it makes a great blank canvas for CNC machining work and engraving. IKEA items used: IKEA IVAR cabinets in 30mm (12″) and 50mm (20″) depths. IVAR cabinet | IKEA.com Other materials and tools: CNC Router How to engrave the IVAR cabinet with doors: Build a wall of IVAR cabinets to your preference. It’s not too difficult to shorten some in order to fill a wall exactly. I shortened the top row to 695mm and reduced the depth of the middle column to 40mm to create a 50/40/30 sequence so that I didn’t block the window but maximised storage capacity. Take a drawing, trace it in Inkscape or Adobe Illustrator into a black-only flat design. You can simplify the path at this point to reduce the time needed to engrave. Chop up the drawing in Inkscape or Adobe Illustrator into door-sized sections. Save as an SVG. Import the ...
Post a Comment
Read more