Skip to main content

Foundation Issues? Here’s How to Tell

Your home is one of your biggest investments, and you want it to remain in prime condition for as long as possible in order to get a high return on that investment. However, foundation issues can threaten this. It’s best to fix foundation issues as soon as possible; the longer they persist, the more expensive it will be to make repairs.

Below, we’ll examine the causes of foundation issues, tell you how to recognize warning signs and offer solutions.

foundation issues of home

Water and soil are common threats to a foundation. Image: Lerman Corporation

Causes of foundation issues

Water is the most likely culprit for foundation issues. An excessive amount of water causes the soil to expand; typical sources are leaks from your plumbing, water from rain and snow and water draining from the roof. On the inverse, not enough water results in shrinkage and settlement.

In addition, soil is often an issue during the home’s construction. If the house is erected on more than one type of soil, settling and shifting will be uneven. In addition, if the soil starts eroding, the foundation will shift. 

Look for cracks and gaps; they may indicate problems with your foundation. Image: Dennis Mayer Photography

Signs of foundation issues

So, how do you tell if your home has foundation issues? Here are a few of the most common warning signs:

Gaps:

  • Between the walls and floor
  • Between the walls and ceiling
  • Above kitchen cabinets
  • Between the garage door and pavement

Cracks on or around:

  • Floors
  • Moldings
  • Sheetrock
  • Bricks
  • Foundation
  • Fireplace

Other signs:

  • Cabinet doors that won’t stay closed
  • Doors and windows that won’t completely close

It should also be noted that a certain amount of settling is normal; if your home has a crack that is less than ¼ inch, fill it in to prevent moisture issues.

Foundation repair requires professional help. Image: Mike Knight Construction

Fixing foundation issues

Minor cracks are relatively easy fixes — though you’ll still need to call a professional — that range from $300 to $700. A more serious issue is a sinking foundation. There are two primary ways to fix this. Piercing is a very expensive process that involves putting supports underneath the structure. This can cost several thousand dollars. Slab jacking or mud jacking, which involves pumping a mixture of cement, water and sand into the slab, is usually much less expensive.

A structural engineer can help you determine what’s causing the foundation problem and suggest the best repair option. 

There are ways to be proactive in preventing foundation problems. Image: DeGraw and DeHaan Architects

Avoiding foundation issues

To lower the probability of encountering foundation issues, reduce the amount of water that gets to the soil under and surrounding your house. For instance, ensure that drainage from your roof’s gutters slopes in the opposite direction of your home, so the water drains several feet away.

Additionally, since the soil will expand and contract depending on moisture level, consider a soaker hose system to keep the soil moist on a regular basis.

The type of tree that you plant close to your home can also increase your chances of developing foundation issues. Oak, willow, elm and poplar are known for absorbing a lot of water, which can dry out your soil and lead to foundation problems. Plant trees away from your house, especially if you want a large, thirsty tree.

Have you dealt with foundation issues? Do you have any other tips for dealing with them? Let us know in the comments!

The post Foundation Issues? Here’s How to Tell appeared first on Freshome.com.

Comments

Post a Comment

Popular posts from this blog

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...
Post a Comment
Read more

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a  Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...
Post a Comment
Read more

A beautiful design idea for the IVAR cabinet with doors

A wall of IVAR cabinets with doors engraved is astonishingly captivating. Because IVAR is real solid wood (unlike a lot of flat-pack cupboards), it makes a great blank canvas for CNC machining work and engraving. IKEA items used: IKEA IVAR cabinets in 30mm (12″) and 50mm (20″) depths. IVAR cabinet | IKEA.com Other materials and tools: CNC Router How to engrave the IVAR cabinet with doors: Build a wall of IVAR cabinets to your preference. It’s not too difficult to shorten some in order to fill a wall exactly. I shortened the top row to 695mm and reduced the depth of the middle column to 40mm to create a 50/40/30 sequence so that I didn’t block the window but maximised storage capacity. Take a drawing, trace it in Inkscape or Adobe Illustrator into a black-only flat design. You can simplify the path at this point to reduce the time needed to engrave. Chop up the drawing in Inkscape or Adobe Illustrator into door-sized sections. Save as an SVG. Import the ...
Post a Comment
Read more