Skip to main content

Small Tilted Kiosks in Canada Inspire a Sense of Movement

Atelier Urban Face completed the design and development of the “Mount-Royal Kiosks” project. These three oddly shaped buildings are meant to spice up urban family escapes in Mount Royal Park, Montreal, Canada.

“The new kiosks take on the shape of the hamlet,” the architects explained. “This was an important factor in the design, as a hamlet incorporates the idea of a village, one that encourages a sense of interaction and community. The positioning of the kiosks are random, representing a dialogue between the kiosks and the main pavilion, the waterfall at Beaver Lake.”

The installation is inspired by two main components: the play of light and the constant shifting of the wind. Thanks to steel structures, each kiosk leans at a different angle, as if being pushed by the wind. The first kiosk is inclined at 10 degrees, designed for both summer and winter class field trips. With enough room for up to 30 people, the activity possibilities are numerous.

The second kiosk, inclined at 20 degrees, houses tools and equipment for park services, as well as a first aid station. The third, with it’s 30-degree incline, is home to the ticket office, plus storage of recreational equipment.

“The uniqueness of each individual kiosk is the result of their integration into the park in the most discreet and harmonious manner possible,” the architects said. “Not only respecting the environmental integrity of the mountain itself, but blending in with the poetry of the landscape, and all this with an eye on longevity.” Information provided by Atelier Urban Face; photography courtesy of Fany Ducharme, Normand Rajotte, Sylvain Legault and Sylvie Perrault.

The post Small Tilted Kiosks in Canada Inspire a Sense of Movement appeared first on Freshome.com.

Comments

Popular posts from this blog

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a  Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...

A beautiful design idea for the IVAR cabinet with doors

A wall of IVAR cabinets with doors engraved is astonishingly captivating. Because IVAR is real solid wood (unlike a lot of flat-pack cupboards), it makes a great blank canvas for CNC machining work and engraving. IKEA items used: IKEA IVAR cabinets in 30mm (12″) and 50mm (20″) depths. IVAR cabinet | IKEA.com Other materials and tools: CNC Router How to engrave the IVAR cabinet with doors: Build a wall of IVAR cabinets to your preference. It’s not too difficult to shorten some in order to fill a wall exactly. I shortened the top row to 695mm and reduced the depth of the middle column to 40mm to create a 50/40/30 sequence so that I didn’t block the window but maximised storage capacity. Take a drawing, trace it in Inkscape or Adobe Illustrator into a black-only flat design. You can simplify the path at this point to reduce the time needed to engrave. Chop up the drawing in Inkscape or Adobe Illustrator into door-sized sections. Save as an SVG. Import the ...