Skip to main content

Hall of stripes! A hallway runner rug DIY

Having searched for ages for a hallway runner rug, which is easy to clean and looks nice in our modern apartment, my husband and I came across SÖFTEN flatwoven cotton rugs (EUR 19.99 each, 80 cm x 150 cm). I wanted more than just to put two rugs one after another, which would not stay put in a busy area.

hallway runner rug

At the end I decided to sew two of them together with nylon thread by hand. As a result I had one long hallway runner rug, which worked perfectly in our hallway.

hallway runner rug

This could also work in the kitchen. If I ever wanted to separate the rugs, it is just a matter of cutting off the nylon thread. The carpet is secured by STOPP underlay to avoid it slipping.

hallway runner rug

This double carpet can even be washed in a domestic washing machine. One could also make a longer carpet, but then the single carpets would have to be separated for washing.

hallway runner rug

~ by Alli, Vienna, Austria

You may also like this hallway runner rug

hallway runner rug

Make a very affordable hallway runner rug using the cheapest IKEA rug available — the SIGNE flatwoven rugs, which goes for only $3.99 each. Three of these would set you back less than a meal in town, and you’ll end up with a sweet runner if you add a few embellishments. See how to hack one.

The post Hall of stripes! A hallway runner rug DIY appeared first on IKEA Hackers.

Comments

Post a Comment

Popular posts from this blog

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...
Post a Comment
Read more

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a  Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...
Post a Comment
Read more

A beautiful design idea for the IVAR cabinet with doors

A wall of IVAR cabinets with doors engraved is astonishingly captivating. Because IVAR is real solid wood (unlike a lot of flat-pack cupboards), it makes a great blank canvas for CNC machining work and engraving. IKEA items used: IKEA IVAR cabinets in 30mm (12″) and 50mm (20″) depths. IVAR cabinet | IKEA.com Other materials and tools: CNC Router How to engrave the IVAR cabinet with doors: Build a wall of IVAR cabinets to your preference. It’s not too difficult to shorten some in order to fill a wall exactly. I shortened the top row to 695mm and reduced the depth of the middle column to 40mm to create a 50/40/30 sequence so that I didn’t block the window but maximised storage capacity. Take a drawing, trace it in Inkscape or Adobe Illustrator into a black-only flat design. You can simplify the path at this point to reduce the time needed to engrave. Chop up the drawing in Inkscape or Adobe Illustrator into door-sized sections. Save as an SVG. Import the ...
Post a Comment
Read more