Help! KALLAX desk combination in horizontal position?

I bought the KALLAX desk combination, pictured below.

I wanted to place the KALLAX unit (2×4) horizontally so it would be 2 high and the product description led me to believe this was possible.

KALLAX desk combination | IKEA.com

From the description it said – “Choose whether you want to place it vertically or horizontally and use it as a shelf or sideboard.”

However the LINNMON connecting fitting does not fit with the unit placed this way. I’ve been onto IKEA customer services and all they said is that the description is wrong …

Any ideas how to connect the LINNMON table top to a horizontally positioned on a 4×2 KALLAX unit.

KALLAX shelving unit | IKEA.com

Do you know or any LINNMON style connecting fitting that could be used in place of the IKEA provided one.

Table connecting hardware | IKEA.com

The problem with the IKEA one is the upward facing side is about 1cm too small to fit over the border of the KALLAX unit of the LINNMON table unit – if it was the same on both sides it would be perfect.

Thanks.

~ Donal

***

Hi Donal

You’re in luck! This Reddit user found a way to attach the LINNMON desk to the KALLAX in horizontal position. Here’s his set-up.

Credit: GayButNotInThatWay

He says “By using the connectors for these two parts and cutting out a small notch in the LINNMON it is possible to use the metal connectors backwards. As the notches are completely inside the outer wooden ‘beam’ of the LINNMON it still allows full strength in the connection.”

Credit: GayButNotInThatWay

See the Reddit post and images here.

Use different hardware

Another way to attach the LINNMON table to the KALLAX table is to use different hardware.

It may be helpful to take a walk at your local hardware shop and see the types of brackets available. I’m sure you’ll be able to find something suitable.

I’d probably try a type of Z bracket, like so. The hard part is probably finding the exact bracket length to connect the table flush to the KALLAX top.

Hope that helps and good luck on your KALLAX desk set-up. And do send us a photo when it’s done.

Happy hacking,

Jules

The post Help! KALLAX desk combination in horizontal position? appeared first on IKEA Hackers.

Comments

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...

A beautiful design idea for the IVAR cabinet with doors

A wall of IVAR cabinets with doors engraved is astonishingly captivating. Because IVAR is real solid wood (unlike a lot of flat-pack cupboards), it makes a great blank canvas for CNC machining work and engraving. IKEA items used: IKEA IVAR cabinets in 30mm (12″) and 50mm (20″) depths. IVAR cabinet | IKEA.com Other materials and tools: CNC Router How to engrave the IVAR cabinet with doors: Build a wall of IVAR cabinets to your preference. It’s not too difficult to shorten some in order to fill a wall exactly. I shortened the top row to 695mm and reduced the depth of the middle column to 40mm to create a 50/40/30 sequence so that I didn’t block the window but maximised storage capacity. Take a drawing, trace it in Inkscape or Adobe Illustrator into a black-only flat design. You can simplify the path at this point to reduce the time needed to engrave. Chop up the drawing in Inkscape or Adobe Illustrator into door-sized sections. Save as an SVG. Import the ...

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...

Martin Cooper

Search This Blog