Skip to main content

How to Keep Your Heating and Cooling Vents Clean

Dusty heating and cooling vents aren’t just ugly. They can also restrict the airflow into a room if the dust buildup gets bad enough, and you risk dust and debris getting down into your air ducts. So, to keep your heating and cooling vents free of dust and debris, below we have both some cleaning tips and some preventative ideas.

These tips to keep your heating and cooling vents clean are actually very easy to do and only take a few minutes. They also tend to be low in cost. You’ll need your vacuum cleaner, some soap and water, towels/rags and crevice cleaning supplies to clean the vent.

Some of the preventative measures, on the other hand, could require some items you don’t already have around the home. For instance, an air purifier to capture dust can run around $20 for small devices or all the way up to hundreds of dollars, depending on how many features you want the device to have. Air vent covers often cost around $5.

Heating and Cooling Vents Vacuum Attachment

Brush attachments on the vacuum can help clean vents easily. Image: paulbiryukov/Getty Images

Cleaning Tips

Regular cleaning is your best bet in keeping your heating and cooling vents free of dust and debris. That way, nothing has the chance to build up to problematic levels. In order to get your vents clean, follow these tips:

  • Start by turning off the power source to your air conditioner at the breaker. That way, your HVAC system won’t kick on when you’re cleaning it, blowing dust everywhere.
  • Vacuum the vent cover itself, ideally with a crevice or brush attachment.
  • Remove the vent cover by unscrewing it, if it’s screwed in place. Pull the cover straight up from the duct.
  • Soak the vent cover in warm, soapy water if there is any stubborn dirt. Keeping soaking until that dirt loosens.
  • Wipe the cover down with a wet rag.
  • You can clean between the slats of the vent cover with any narrow cleaning tool, like a pipe cleaner, narrow soft brush or even a cotton swab.
  • You should manually dry between the slats with either a thin rag or a hair dryer on the hot setting to prevent water from pooling. If you use a hair dryer, be careful touching the metal after you blow dry it on a hot setting, as the metal can get warm. From there, you can either let heating and cooling vents air dry on a towel or dry them by hand.
  • After they’re dry, put the vent covers back and turn the power source back on.
Heating and Cooling Vents Pet by Vent

Pets seem to be naturally attracted to vents. Image: @jenlpalmer/Twenty20

Preventative Maintenance for Your Heating and Cooling Vents

You can also keep your heating and cooling vents clear of dust and debris with some defensive measures. A popular way to do so is to invest in a magnetic or plastic vent cover. These are usually used to direct airflow in a certain direction or to prevent excess air from coming through a closed vent, so they’re only suitable if you wish to restrict airflow. But they have the added benefit of keeping dust and grime off the vent, too.

Another option is to protect the heating and cooling vents themselves through lifestyle changes. For instance, encourage pets to avoid the heating and cooling vents if they have a habit of laying on or near them. That will keep dirt and pet hair away from the heating and cooling system. Make sure to vacuum the floor regularly so that dirt and debris are not close to the vent. You may also want to invest in an indoor air purifier to remove dust from the home.

The post How to Keep Your Heating and Cooling Vents Clean appeared first on Freshome.com.

Comments

Post a Comment

Popular posts from this blog

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...
Post a Comment
Read more

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a  Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...
Post a Comment
Read more

6 Clever & Easy IKEA FLISAT Table hacks for more Fun & Play

The IKEA FLISAT children’s table is quite a smart little thing. See those white covers? It’s a secret compartment. Open them up and you’ll fit 2 TROFAST storage tubs snug under the top of the table. Your child can reach in and get his or her LEGO bricks -– and then — most importantly, sweep everything down into the bin to clean up. Or at least that’s what we all hope the kiddo does! It’s also perfect for sensory play. Instagram is full of ideas on what to add to those tubs to maximise them. Think of filling them with rice, pasta or chickpeas, you name it, to develop fine motor skills. Read on to see how you can make the $50 table work harder for so much more fun. #1 Simple mod turns the IKEA FLISAT into a Play & Craft table Lauren has a very simple yet practical hack to turn the FLISAT children’s table into a play table with more storage and better organisation. Materials: Photo: IKEA.com FLISAT table with TROFAST tubs ONSKLIG change table containers Wood bracket ...
Post a Comment
Read more