Skip to main content

Hackers Help: Need advice on this bookcase over radiator

Hi, my name is Helene. I have a wall in my new kitchen that is tall, quite long and has a stupidly long radiator on it. And I need space to tidy i.e. cooking books and family memorabilia, on a budget…

Seeing the fabulous results some of your hackers managed to reach using IVAR modules as a base frame (like this one here), I’ve been playing with the idea of doing something like this, an IVAR bookcase over the radiator:

Need advice on this bookcase over radiator

That is, using the 30 cm deep IVAR modules to create shelving above and around the radiator, and possibly covering the sides with mdf / plywood etc like previous hackers did.

IKEA Ivar unit

IVAR | IKEA.com

That would involve cutting one leg on two of the side-units to be above radiator level (thus transforming them as shown at the foreground of the sketch above).

Need advice on this bookcase over radiator

I would attach all the vertical units to the wall (so probably not using the cross-braces shown on the sketch). But I was wondering if that would be enough for the two “amputated” legs — should I support the cut section with a sort of L-bracket?

Did anyone ever do something similar, and has advice? Or would you have another idea to deal with that radiator nuisance? Removing it is unfortunately not an option at the moment.

~ by Helene

***

Hi Helene

The IVAR is a great choice. It’s sturdy, open to different configurations and so easy to hack. I like your idea of building a bookcase over the radiator. With your books and memorabilia around it, you’ll soon not even notice the XL radiator. 

As the IVAR verticals are attached to the wall, I believe they would be strong enough, since the two front legs are maintained. Those two front legs will need to be extra hard working and hold up a lot of the weight.

Also, do make sure the IVAR verticals are firmly attached to the wall with the right wall plugs and screws. You’ll need them anchored to wall studs if it’s a drywall, so they can hold the weight of the shelves and prevent them from ripping out of the wall.

Good luck on the build. And let us know how it goes.

Happy hacking

Jules

 

The post Hackers Help: Need advice on this bookcase over radiator appeared first on IKEA Hackers.

Comments

Post a Comment

Popular posts from this blog

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...
Post a Comment
Read more

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a  Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...
Post a Comment
Read more

A beautiful design idea for the IVAR cabinet with doors

A wall of IVAR cabinets with doors engraved is astonishingly captivating. Because IVAR is real solid wood (unlike a lot of flat-pack cupboards), it makes a great blank canvas for CNC machining work and engraving. IKEA items used: IKEA IVAR cabinets in 30mm (12″) and 50mm (20″) depths. IVAR cabinet | IKEA.com Other materials and tools: CNC Router How to engrave the IVAR cabinet with doors: Build a wall of IVAR cabinets to your preference. It’s not too difficult to shorten some in order to fill a wall exactly. I shortened the top row to 695mm and reduced the depth of the middle column to 40mm to create a 50/40/30 sequence so that I didn’t block the window but maximised storage capacity. Take a drawing, trace it in Inkscape or Adobe Illustrator into a black-only flat design. You can simplify the path at this point to reduce the time needed to engrave. Chop up the drawing in Inkscape or Adobe Illustrator into door-sized sections. Save as an SVG. Import the ...
Post a Comment
Read more