Skip to main content

Brick Bungalow in Canada Becomes Modern ‘Flipped House’


Flipped House is a two-story residence with a modern, turnkey design located in a neighborhood dominated by more traditional architecture. The team at Atelier RZLBD renovated an existing brick bungalow in Ontario, Canada, and added a second level to the structure.

The project gets its name from its unconventional “flipped” layout. While a typical dwelling keeps all public-facing spaces confined to its main floor, with private areas like bedrooms sequestered upstairs, Flipped House divides its public and private zones on either side of a vertical plane.

As a result, the home’s den, kitchen, dining and living rooms are all located on its street-facing northeast side, while the house’s three bedrooms span both levels of the building’s more secluded southwestern end.


Inside, knotty cedar slats surround the linked kitchen and dining room, wrapping up the side walls and the ceiling above to create a sense of warmth and grandeur. The linked first-floor kitchen and dining room are double-height spaces, which produce a dramatic effect when entering the house.

Upstairs, a flexible family room carries on to a small wooden patio built atop the existing garage. At the other end there is an airy home office providing desk space for two. Information provided by Atelier RZLBD; architectural photography courtesy of Borzu Talaie.

The post Brick Bungalow in Canada Becomes Modern ‘Flipped House’ appeared first on Freshome.com.

Comments

Popular posts from this blog

Hackers Help: How to attach headboard to ESPEVÄR mattress base?

I’m trying to figure out if a headboard can be attached to an Espevar Mattress Base , and how to accomplish that. I’m looking at a standard metal headboard (because I just prefer the look of curved metal to what IKEA offers) and am not interested in a slat base with just a mattress on top, and a wall mounted headboard is not an option due to renting. Thanks for any help! ~ Amy *** Hi Amy I’ve not seen the ESPEVÄR in person but I believe it is possible to attach a headboard to it. From the website, the ESPEVÄR looks like a regular wooden slatted mattress base under a bed base slipover. As to how to attach it, that will depend on the fittings on the metal headboard. So you will just need to get the right hardware to secure the metal headboard to the wooden frame. And make some small openings on the slipcover to let the fixtures to go through. Jules Photo: IKEA.com Try these free-standing headboards for size A lime green and white headboard that takes centerstage in the r...

Kitchen renovation reveal: Rhombus wall steals the show

It’s been a while since I did a home tour. If you’ve missed the previous reveals, you can catch up with my Master Bathroom remodel and Guest Bathroom reveal . Today, let’s focus on my kitchen renovation. Hands down, this is the most used room in my home. I spend crazy amounts of time in here, even when I’m not cooking. Just off to the side of the kitchen I converted an awkward space into a reading nook . In the mornings, I sit and read or pray and meditate, before it gets too warm. And on the other side, there’s a work-in-progress plant wall / indoor garden which also takes up a lot of my time. So, all in all, lots of traffic in here, and that’s not even counting cooking and eating time. The kitchen is definitely my favourite room, because the transformation is huge and I love how it turned out. Kitchen renovation: The before House 17 when I first got it, actually had 2 kitchens, which is a very common “Asian” home concept. First, the “dry kitchen”, which is where you make simp...

IKEA sofa with genius armrest storage

Bet you never knew your sofa armrests were prime storage space. Ok, so the guys at IKEA are the masters of hidden / secret storage everywhere. In fact, one of the things I most loved about the  ESKILSTUNA sofa series was the undercover storage on the chaise lounge, but… what? More than 80 liters of storage space wasted on the armrests? NO WAY! I really don’t understand how they didn’t take that opportunity with several different armrest modules. Mobile chargers, cup / can holders, foldable tables, refrigerators… there’s SO MUCH space in there. I can’t stop thinking on different options! For myself, I went for two designs. First, a “full space” design on the (right) side of the chaise lounge. (The cavity fits two foldable chairs). Second, on the left armrest — a flip open section for “mobile charger / remote control storage / etc.”. Below that, a full-depth pull-out drawer, tall enough to store A4 sized magazines. This is the final result: Full space design, rig...