Skip to main content

HEMNES console table restyled to TV unit

IKEA item used:
HEMNES console table

We have awkwardly placed plugs in the lounge in our new build house, they’re a little higher than normal and so are on show, which isn’t very pretty.

I decided the HEMNES console table would suit what we needed in terms of storage and height and with a little tweaking would have the right look for our home.

I bought the HEMNES console table in light brown (wood effect) and when putting together I purposefully left out 2 of the top shelves so I had space for the Sky box and Xbox. It was a little tricky to do this as you assemble upside down so you need 2 people.

HEMNES console table

I filled in the dowel holes with wood filler and sanded smooth. I painted the unit with Valspar paint (a £3 b&q sample pot!) the shade is Hazy Earth. I left the top of the unit plain to give it that farmhouse look. I then sealed the whole unit with a finishing wax.

HEMNES console table restyled to TV unit

I bought some mdf sheets, painted them in the same colour as I had painted the unit and then nailed to the back. This ensured that the many plug sockets and cables were completely hidden. We drilled a hole either side of the top shelving to enable the cables to come through to the back.

I used the KNIPSA boxes and have attached a black felt inside so the hole doesn’t show what mess there is inside them!

HEMNES console table restyled to TV unit

We carefully sawed the legs on the unit so only an inch was left, that way the extension cable (which you can see in one of the pictures after painting) wasn’t visible and it made it look less like a console table.

And that’s it, the unit has the storage space IKEA always gives us and has the height we needed whilst tying in with our “modern farmhouse” theme in our new home, without the high price tag we would have had to otherwise to pay!

HEMNES console table restyled to TV unit

~ by Lauren Blake

The post HEMNES console table restyled to TV unit appeared first on IKEA Hackers.

Comments

Post a Comment

Popular posts from this blog

SKÅDIS: 5 ways to make the IKEA pegboard even better

IKEA introduced its own pegboard system, SKÅDIS, two years ago and I’d say it’s one of the best systems IKEA launched in recent years. I love how super customisable it is, with a growing range of accessories that help keep things organized. It works everywhere, in your wardrobe to bathroom . Probably anywhere you have a flat surface to hang it up. Photo: IKEA.com SKÅDIS pegboard system See it on IKEA.com But no matter how perfect a system, you can trust IKEA hackers to improve on the SKÅDIS. And they’ve settle these 5 issues you may have faced with the handy IKEA pegboard. Read on for their fixes. 5 IKEA SKÅDIS issues and fixes #1 Expensive hooks? You’ll need quite a number of hooks and accessories to fill up the SKÅDIS pegboard, and Kenyer was shocked at how quickly they all added up. So he figured he could make his own hooks to save cost. Photo: Kenyer Over at Instructables , he shows us how to twist copper wires into the SKÅDIS hook shape. It works s...
Post a Comment
Read more

Hackers Help: How to remake cam lock holes?

I want to put a 78.5” wide PAX configuration in a 77” space for a kids room . My plan is to eliminate the drawer on the right unit, then cut the shelves and rails to be 1.5” narrower. My question is, how do people attach two laminated pressboard IKEA pieces after they’ve cut off the cam lock holes? Related: See more Hackers Help questions and answers . Are they using drills bits and/or tiny hole saws to remake the cam lock holes? Or screws drilled in from the outside with wood glue? The outside pieces won’t be visible in my completed setup so I could go either way. I’m curious what other people are doing, either I haven’t seen this detail in past hacks or I haven’t been paying attention. ~ by Jenny *** Hi Jenny The best and tidiest method is to use the cut-off portion as a template to reproduce the same cam lock holes in the correct positions. The right sized drill bits and a  Forstner bit should do the trick. A Forstner bit will drill a flat-bottomed hole (...
Post a Comment
Read more

A beautiful design idea for the IVAR cabinet with doors

A wall of IVAR cabinets with doors engraved is astonishingly captivating. Because IVAR is real solid wood (unlike a lot of flat-pack cupboards), it makes a great blank canvas for CNC machining work and engraving. IKEA items used: IKEA IVAR cabinets in 30mm (12″) and 50mm (20″) depths. IVAR cabinet | IKEA.com Other materials and tools: CNC Router How to engrave the IVAR cabinet with doors: Build a wall of IVAR cabinets to your preference. It’s not too difficult to shorten some in order to fill a wall exactly. I shortened the top row to 695mm and reduced the depth of the middle column to 40mm to create a 50/40/30 sequence so that I didn’t block the window but maximised storage capacity. Take a drawing, trace it in Inkscape or Adobe Illustrator into a black-only flat design. You can simplify the path at this point to reduce the time needed to engrave. Chop up the drawing in Inkscape or Adobe Illustrator into door-sized sections. Save as an SVG. Import the ...
Post a Comment
Read more