I replaced single-glazed sliding doors that divided the sitting room and dining room with a sliding KALLAX bookcase. For one “door”, I used two 2×2 cubes and one 2×1 unit. As we already owned 4 separate KALLAX 2×2 cubes and they seemed to be exactly the same width as the internal doors, we thought it might be possible to stack them. With one additional 2×1 KALLAX they almost matched the height of the internal doors. Sliding KALLAX bookcase doors in closed position First, still a work in progress but let us show you how it looks from the dining room, when the units are pushed together to close up the doorway. And the units pushed apart to enter the living room. We can access the storage cubes from both sides — from the dining or living room — which is so very useful. What I like most is, when viewed from the living room, when closed, it looks almost like a built-in unit. IKEA item used: 2×2 KALLAX units x 4 1×2 KALLAX units x 2 Other materials: 3M mounting tape
The saying still holds true, “One’s man trash is another man’s treasure.” Trammell repurposed a set of SULTAN LÖDINGEN bed slats salvaged from the trash into a chair. He says, “Amsterdam’s trash is full of renewable resources, if you have the right bike to carry it home.” Photo: Trammell Hudson/ Twitter The SULTAN LÖDINGEN slats are made from layer-glued birch veneer to provide supply support, Despite its curved form, it is surprisingly strong. And you can take it apart to make interesting stuff like this chair. Photo: Trammell Hudson/ Twitter Repurpose bed slats to curvy chair He first dismantled the slats from the beams. Then, with a jigsaw, shortened them for the seat. These cut slats are then glued to the shortened beams and fixed with screws. Photo: Trammell Hudson/ Twitter Photo: Trammell Hudson/ Twitter The same process is repeated but with longer slats for a high back chair. Photo: Trammell Hudson/ Twitter The slats on the left and righ